2009-07-16 16:48:47 +02:00
// Copyright (c) 2008-2009, Karl Blomster
2008-09-23 22:01:11 +02:00
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of the Aegisub Group nor the names of its contributors
// may be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
2009-07-29 07:43:02 +02:00
// Aegisub Project http://www.aegisub.org/
2008-09-23 22:01:11 +02:00
//
2009-07-29 07:43:02 +02:00
// $Id$
/// @file ffmpegsource_common.cpp
2009-07-30 08:40:25 +02:00
/// @brief Shared code for ffms video and audio providers
/// @ingroup video_input audio_input ffms
2009-07-29 07:43:02 +02:00
///
2008-09-23 22:01:11 +02:00
2009-01-04 07:31:48 +01:00
# include "config.h"
2011-12-22 22:25:49 +01:00
# ifdef WITH_FFMS2
2008-09-23 22:01:11 +02:00
2009-09-10 15:06:40 +02:00
# ifndef AGI_PRE
2010-08-25 21:31:26 +02:00
# include <inttypes.h>
2009-09-10 15:06:40 +02:00
# include <map>
2010-08-25 21:31:26 +02:00
2009-09-10 15:06:40 +02:00
# include <wx/dir.h>
2009-09-11 00:48:29 +02:00
# include <wx/choicdlg.h> // Keep this last so wxUSE_CHOICEDLG is set.
2009-09-10 15:06:40 +02:00
# endif
2010-06-09 01:21:39 +02:00
# include <libaegisub/log.h>
2010-05-21 03:13:36 +02:00
# include "compat.h"
2011-09-28 21:47:40 +02:00
# include "dialog_progress.h"
2008-09-23 22:01:11 +02:00
# include "ffmpegsource_common.h"
2008-10-28 05:03:29 +01:00
# include "frame_main.h"
2009-09-10 15:06:40 +02:00
# include "main.h"
# include "md5.h"
# include "standard_paths.h"
2009-05-03 20:05:30 +02:00
wxMutex FFmpegSourceProvider : : CleaningInProgress ;
2009-08-05 13:21:00 +02:00
/// @brief Callback function that updates the indexing progress dialog
/// @param Current The current file positition in bytes
/// @param Total The total file size in bytes
2011-09-28 21:47:40 +02:00
/// @param Private A pointer to the progress sink to update
2009-08-05 13:21:00 +02:00
/// @return Returns non-0 if indexing is cancelled, 0 otherwise.
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
///
2011-09-28 21:47:40 +02:00
static int FFMS_CC UpdateIndexingProgress ( int64_t Current , int64_t Total , void * Private ) {
agi : : ProgressSink * ps = static_cast < agi : : ProgressSink * > ( Private ) ;
ps - > SetProgress ( Current , Total ) ;
return ps - > IsCancelled ( ) ;
2008-09-23 22:01:11 +02:00
}
2011-09-28 21:47:40 +02:00
/// A wrapper around FFMS_DoIndexing to make the signature void -> void
static void DoIndexingWrapper ( FFMS_Index * * Ret , FFMS_Indexer * Indexer , int IndexMask , int ErrorHandling , void * ICPrivate , FFMS_ErrorInfo * ErrorInfo ) {
* Ret = FFMS_DoIndexing ( Indexer , IndexMask , FFMS_TRACKMASK_NONE , NULL , NULL , ErrorHandling ,
UpdateIndexingProgress , ICPrivate , ErrorInfo ) ;
}
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
2009-08-05 13:21:00 +02:00
/// @brief Does indexing of a source file
/// @param Indexer A pointer to the indexer object representing the file to be indexed
/// @param CacheName The filename of the output index file
/// @param Trackmask A binary mask of the track numbers to index
/// @param IgnoreDecodeErrors True if audio decoding errors will be tolerated, false otherwise
/// @return Returns the index object on success, NULL otherwise
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
///
2009-11-28 22:13:47 +01:00
FFMS_Index * FFmpegSourceProvider : : DoIndexing ( FFMS_Indexer * Indexer , const wxString & CacheName , int Trackmask , FFMS_IndexErrorHandling IndexEH ) {
2009-09-26 23:58:00 +02:00
char FFMSErrMsg [ 1024 ] ;
FFMS_ErrorInfo ErrInfo ;
ErrInfo . Buffer = FFMSErrMsg ;
ErrInfo . BufferSize = sizeof ( FFMSErrMsg ) ;
ErrInfo . ErrorType = FFMS_ERROR_SUCCESS ;
ErrInfo . SubType = FFMS_ERROR_SUCCESS ;
2008-09-24 01:30:27 +02:00
wxString MsgString ;
// set up progress dialog callback
2011-12-22 22:17:30 +01:00
DialogProgress Progress ( wxGetApp ( ) . frame , _ ( " Indexing " ) , _ ( " Reading timecodes and frame/sample data " ) ) ;
2008-09-24 01:30:27 +02:00
// index all audio tracks
2011-09-28 21:47:40 +02:00
FFMS_Index * Index ;
Progress . Run ( bind ( DoIndexingWrapper , & Index , Indexer , Trackmask , IndexEH , std : : tr1 : : placeholders : : _1 , & ErrInfo ) ) ;
2009-07-16 16:48:47 +02:00
if ( Index = = NULL ) {
2011-09-28 21:43:11 +02:00
MsgString . Append ( " Failed to index: " ) . Append ( wxString ( ErrInfo . Buffer , wxConvUTF8 ) ) ;
2008-09-24 01:30:27 +02:00
throw MsgString ;
}
// write index to disk for later use
2008-10-28 02:39:42 +01:00
// ignore write errors for now
2009-09-26 23:58:00 +02:00
FFMS_WriteIndex ( CacheName . utf8_str ( ) , Index , & ErrInfo ) ;
2008-10-28 02:39:42 +01:00
/*if (FFMS_WriteIndex(CacheName.char_str(), Index, FFMSErrMsg, MsgSize)) {
2008-09-24 01:30:27 +02:00
wxString temp ( FFMSErrMsg , wxConvUTF8 ) ;
2011-09-28 21:43:11 +02:00
MsgString < < " Failed to write index: " < < temp ;
2008-09-24 01:30:27 +02:00
throw MsgString ;
2008-10-28 02:39:42 +01:00
} */
2008-09-24 01:30:27 +02:00
return Index ;
}
2009-08-05 13:21:00 +02:00
/// @brief Finds all tracks of the given type and return their track numbers and respective codec names
/// @param Indexer The indexer object representing the source file
/// @param Type The track type to look for
/// @return Returns a std::map with the track numbers as keys and the codec names as values.
2009-09-26 23:58:00 +02:00
std : : map < int , wxString > FFmpegSourceProvider : : GetTracksOfType ( FFMS_Indexer * Indexer , FFMS_TrackType Type ) {
2009-07-16 16:48:47 +02:00
std : : map < int , wxString > TrackList ;
int NumTracks = FFMS_GetNumTracksI ( Indexer ) ;
for ( int i = 0 ; i < NumTracks ; i + + ) {
if ( FFMS_GetTrackTypeI ( Indexer , i ) = = Type ) {
wxString CodecName ( FFMS_GetCodecNameI ( Indexer , i ) , wxConvUTF8 ) ;
TrackList . insert ( std : : pair < int , wxString > ( i , CodecName ) ) ;
}
}
return TrackList ;
}
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
/// @brief Ask user for which track he wants to load
2009-08-05 13:21:00 +02:00
/// @param TrackList A std::map with the track numbers as keys and codec names as values
/// @param Type The track type to ask about
/// @return Returns the track number chosen (an integer >= 0) on success, or a negative integer if the user cancelled.
2009-07-16 16:48:47 +02:00
int FFmpegSourceProvider : : AskForTrackSelection ( const std : : map < int , wxString > & TrackList , FFMS_TrackType Type ) {
std : : vector < int > TrackNumbers ;
wxArrayString Choices ;
for ( std : : map < int , wxString > : : const_iterator i = TrackList . begin ( ) ; i ! = TrackList . end ( ) ; i + + ) {
2011-09-28 21:43:48 +02:00
Choices . Add ( wxString : : Format ( _ ( " Track %02d: %s " ) , i - > first , i - > second ) ) ;
2009-07-16 16:48:47 +02:00
TrackNumbers . push_back ( i - > first ) ;
}
2012-01-08 02:05:13 +01:00
int Choice = wxGetSingleChoiceIndex (
Type = = FFMS_TYPE_VIDEO ? _ ( " Multiple video tracks detected, please choose the one you wish to load: " ) : _ ( " Multiple audio tracks detected, please choose the one you wish to load: " ) ,
Type = = FFMS_TYPE_VIDEO ? _ ( " Choose video track " ) : _ ( " Choose audio track " ) ,
Choices ) ;
2009-07-16 16:48:47 +02:00
if ( Choice < 0 )
return Choice ;
else
return TrackNumbers [ Choice ] ;
}
2009-07-24 03:41:16 +02:00
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
/// @brief Set ffms2 log level according to setting in config.dat
2009-07-24 03:41:16 +02:00
void FFmpegSourceProvider : : SetLogLevel ( ) {
2010-05-21 03:13:36 +02:00
wxString LogLevel = lagi_wxString ( OPT_GET ( " Provider/FFmpegSource/Log Level " ) - > GetString ( ) ) ;
2009-07-24 03:41:16 +02:00
2011-09-28 21:43:11 +02:00
if ( ! LogLevel . CmpNoCase ( " panic " ) )
2009-07-24 03:41:16 +02:00
FFMS_SetLogLevel ( FFMS_LOG_PANIC ) ;
2011-09-28 21:43:11 +02:00
else if ( ! LogLevel . CmpNoCase ( " fatal " ) )
2009-07-24 03:41:16 +02:00
FFMS_SetLogLevel ( FFMS_LOG_FATAL ) ;
2011-09-28 21:43:11 +02:00
else if ( ! LogLevel . CmpNoCase ( " error " ) )
2009-07-24 03:41:16 +02:00
FFMS_SetLogLevel ( FFMS_LOG_ERROR ) ;
2011-09-28 21:43:11 +02:00
else if ( ! LogLevel . CmpNoCase ( " warning " ) )
2009-07-24 03:41:16 +02:00
FFMS_SetLogLevel ( FFMS_LOG_WARNING ) ;
2011-09-28 21:43:11 +02:00
else if ( ! LogLevel . CmpNoCase ( " info " ) )
2009-07-24 03:41:16 +02:00
FFMS_SetLogLevel ( FFMS_LOG_INFO ) ;
2011-09-28 21:43:11 +02:00
else if ( ! LogLevel . CmpNoCase ( " verbose " ) )
2009-07-24 03:41:16 +02:00
FFMS_SetLogLevel ( FFMS_LOG_VERBOSE ) ;
2011-09-28 21:43:11 +02:00
else if ( ! LogLevel . CmpNoCase ( " debug " ) )
2009-07-24 03:41:16 +02:00
FFMS_SetLogLevel ( FFMS_LOG_DEBUG ) ;
else
FFMS_SetLogLevel ( FFMS_LOG_QUIET ) ;
}
2009-11-28 22:13:47 +01:00
FFMS_IndexErrorHandling FFmpegSourceProvider : : GetErrorHandlingMode ( ) {
2010-06-03 07:07:10 +02:00
wxString Mode = lagi_wxString ( OPT_GET ( " Provider/Audio/FFmpegSource/Decode Error Handling " ) - > GetString ( ) ) ;
2009-11-28 22:13:47 +01:00
2011-09-28 21:43:11 +02:00
if ( ! Mode . CmpNoCase ( " ignore " ) )
2009-11-28 22:13:47 +01:00
return FFMS_IEH_IGNORE ;
2011-09-28 21:43:11 +02:00
else if ( ! Mode . CmpNoCase ( " clear " ) )
2009-11-28 22:13:47 +01:00
return FFMS_IEH_CLEAR_TRACK ;
2011-09-28 21:43:11 +02:00
else if ( ! Mode . CmpNoCase ( " stop " ) )
2009-11-28 22:13:47 +01:00
return FFMS_IEH_STOP_TRACK ;
2011-09-28 21:43:11 +02:00
else if ( ! Mode . CmpNoCase ( " abort " ) )
2009-11-28 22:13:47 +01:00
return FFMS_IEH_ABORT ;
else
return FFMS_IEH_STOP_TRACK ; // questionable default?
}
2010-08-25 21:31:26 +02:00
# include <inttypes.h>
2009-08-05 13:21:00 +02:00
/// @brief Generates an unique name for the ffms2 index file and prepares the cache folder if it doesn't exist
/// @param filename The name of the source file
/// @return Returns the generated filename.
2009-09-27 02:32:19 +02:00
wxString FFmpegSourceProvider : : GetCacheFilename ( const wxString & _filename )
2008-10-28 05:03:29 +01:00
{
// Get the size of the file to be hashed
wxFileOffset len = 0 ;
{
2009-09-27 02:32:19 +02:00
wxFile file ( _filename , wxFile : : read ) ;
2008-10-28 05:03:29 +01:00
if ( file . IsOpened ( ) ) len = file . Length ( ) ;
}
2009-09-27 02:32:19 +02:00
wxFileName filename ( _filename ) ;
2010-08-25 21:31:26 +02:00
// Generate string to be hashed
wxString toHash = wxString : : Format ( " %s % " PRId64 " % " PRId64 , filename . GetFullName ( ) , len , ( int64_t ) filename . GetModificationTime ( ) . GetTicks ( ) ) ;
2010-07-16 12:33:54 +02:00
2008-10-28 05:03:29 +01:00
// Get the MD5 digest of the string
2009-07-23 17:37:47 +02:00
const wchar_t * tmp = toHash . wc_str ( ) ;
2008-10-28 05:03:29 +01:00
md5_state_t state ;
md5_byte_t digest [ 16 ] ;
md5_init ( & state ) ;
2009-07-23 17:37:47 +02:00
md5_append ( & state , ( md5_byte_t * ) tmp , toHash . Length ( ) * sizeof ( wchar_t ) ) ;
2008-10-28 05:03:29 +01:00
md5_finish ( & state , digest ) ;
// Generate the filename
unsigned int * md5 = ( unsigned int * ) digest ;
2012-01-08 02:34:57 +01:00
wxString result = wxString : : Format ( " ?local/ffms2cache/%08X%08X%08X%08X.ffindex " , md5 [ 0 ] , md5 [ 1 ] , md5 [ 2 ] , md5 [ 3 ] ) ;
2008-10-28 05:03:29 +01:00
result = StandardPaths : : DecodePath ( result ) ;
// Ensure that folder exists
wxFileName fn ( result ) ;
wxString dir = fn . GetPath ( ) ;
if ( ! wxFileName : : DirExists ( dir ) ) {
wxFileName : : Mkdir ( dir ) ;
}
wxFileName dirfn ( dir ) ;
2011-09-28 21:43:11 +02:00
return dirfn . GetShortPath ( ) + " / " + fn . GetFullName ( ) ;
2008-10-28 05:03:29 +01:00
}
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
2009-08-05 13:21:00 +02:00
/// @brief Starts the cache cleaner thread
/// @return True on success, false if the thread could not be started.
2009-05-03 20:05:30 +02:00
bool FFmpegSourceProvider : : CleanCache ( ) {
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " attempting to start thread " ;
2009-05-03 20:05:30 +02:00
FFmpegSourceCacheCleaner * CleaningThread = new FFmpegSourceCacheCleaner ( this ) ;
if ( CleaningThread - > Create ( ) ! = wxTHREAD_NO_ERROR ) {
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " thread creation failed " ;
2009-05-03 20:05:30 +02:00
delete CleaningThread ;
CleaningThread = NULL ;
return false ;
}
if ( CleaningThread - > Run ( ) ! = wxTHREAD_NO_ERROR ) {
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " failed to start thread " ;
2009-05-03 20:05:30 +02:00
delete CleaningThread ;
CleaningThread = NULL ;
return false ;
}
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " thread started successfully " ;
2009-05-03 20:05:30 +02:00
return true ;
}
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
/// @brief constructor
2009-08-05 13:21:00 +02:00
/// @param par the parent provider
2009-05-03 20:05:30 +02:00
FFmpegSourceCacheCleaner : : FFmpegSourceCacheCleaner ( FFmpegSourceProvider * par ) : wxThread ( wxTHREAD_DETACHED ) {
parent = par ;
}
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00
2009-08-05 13:21:00 +02:00
/// @brief Cleans the ffms2 index cache folder
/// @return Returns non-0 on error, 0 otherwise.
2009-05-03 20:05:30 +02:00
wxThread : : ExitCode FFmpegSourceCacheCleaner : : Entry ( ) {
wxMutexLocker lock ( FFmpegSourceProvider : : CleaningInProgress ) ;
if ( ! lock . IsOk ( ) ) {
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " cleaning already in progress, thread exiting " ;
2009-05-03 20:05:30 +02:00
return ( wxThread : : ExitCode ) 1 ;
}
2012-01-08 02:34:57 +01:00
wxString cachedirname = StandardPaths : : DecodePath ( " ?local/ffms2cache/ " ) ;
2009-05-03 20:05:30 +02:00
wxDir cachedir ;
if ( ! cachedir . Open ( cachedirname ) ) {
2011-09-28 21:43:48 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " couldn't open cache directory " < < STD_STR ( cachedirname ) ;
2009-05-03 20:05:30 +02:00
return ( wxThread : : ExitCode ) 1 ;
}
// sleep for a bit so we (hopefully) don't thrash the disk too much while indexing is in progress
wxThread : : This ( ) - > Sleep ( 2000 ) ;
// the option is in megabytes, we need bytes
// shift left by 20 is CLEARLY more efficient than multiplying by 1048576
2010-05-21 03:13:36 +02:00
int64_t maxsize = OPT_GET ( " Provider/FFmpegSource/Cache/Size " ) - > GetInt ( ) < < 20 ;
2009-05-03 20:05:30 +02:00
int64_t cursize = wxDir : : GetTotalSize ( cachedirname ) . GetValue ( ) ;
2010-05-21 03:13:36 +02:00
int maxfiles = OPT_GET ( " Provider/FFmpegSource/Cache/Files " ) - > GetInt ( ) ;
2009-05-03 20:05:30 +02:00
2011-09-28 21:43:11 +02:00
if ( ! cachedir . HasFiles ( " *.ffindex " ) ) {
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " no index files in cache folder, exiting " ;
2009-05-03 20:05:30 +02:00
return ( wxThread : : ExitCode ) 0 ;
}
int deleted = 0 ;
int numfiles = 0 ;
std : : multimap < int64_t , wxFileName > cachefiles ;
wxString curfn_str ;
wxFileName curfn ;
wxDateTime curatime ;
// unusually paranoid sanity check
// (someone might have deleted the file(s) after we did HasFiles() above; does wxDir.Open() lock the dir?)
2011-09-28 21:43:11 +02:00
if ( ! cachedir . GetFirst ( & curfn_str , " *.ffindex " , wxDIR_FILES ) ) {
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " undefined error " ;
2009-05-03 20:05:30 +02:00
return ( wxThread : : ExitCode ) 1 ;
}
numfiles + + ;
curfn = wxFileName ( cachedirname , curfn_str ) ;
curfn . GetTimes ( & curatime , NULL , NULL ) ;
// FIXME: will break when the time_t's wrap around!!1!
cachefiles . insert ( std : : pair < int64_t , wxFileName > ( curatime . GetTicks ( ) , curfn ) ) ;
while ( cachedir . GetNext ( & curfn_str ) ) {
curfn = wxFileName ( cachedirname , curfn_str ) ;
curfn . GetTimes ( & curatime , NULL , NULL ) ;
cachefiles . insert ( std : : pair < int64_t , wxFileName > ( curatime . GetTicks ( ) , curfn ) ) ;
numfiles + + ;
wxThread : : This ( ) - > Sleep ( 250 ) ;
}
if ( numfiles < = maxfiles & & cursize < = maxsize ) {
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " cache does not need cleaning (maxsize= " < < ( int ) maxsize < < " , cursize= " < < ( int ) cursize < < " ; maxfiles= " < < maxfiles < < " numfiles= " < < numfiles < < " ,exiting " ;
2009-05-03 20:05:30 +02:00
return ( wxThread : : ExitCode ) 0 ;
}
for ( std : : multimap < int64_t , wxFileName > : : iterator i = cachefiles . begin ( ) ; i ! = cachefiles . end ( ) ; i + + ) {
// stop cleaning?
if ( ( cursize < = maxsize & & numfiles < = maxfiles ) | | numfiles < = 1 )
break ;
2010-06-09 01:21:39 +02:00
2009-05-03 20:05:30 +02:00
int64_t fsize = i - > second . GetSize ( ) . GetValue ( ) ;
if ( ! wxRemoveFile ( i - > second . GetFullPath ( ) ) ) {
2011-09-28 21:43:48 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " failed to remove file " < < STD_STR ( i - > second . GetFullPath ( ) ) ;
2009-05-03 20:05:30 +02:00
continue ;
}
cursize - = fsize ;
numfiles - - ;
deleted + + ;
wxThread : : This ( ) - > Sleep ( 250 ) ;
}
2010-06-09 01:21:39 +02:00
LOG_D ( " provider/ffmpegsource/cache " ) < < " deleted " < < deleted < < " files, exiting " ;
2009-05-03 20:05:30 +02:00
return ( wxThread : : ExitCode ) 0 ;
}
2011-12-22 22:25:49 +01:00
# endif // WITH_FFMS2
2009-07-29 07:43:02 +02:00
Note: This was done using a script! it's far from perfect but 95% of the work has been done already formatting-wise.
Document all functions, class, struct, union, enum, macro, variable, typedefs. This isn't the actual document in itself but empty documentation using any old documentation if it was there.
This was done using exuberant ctags to get tag info, then a TCL script to parse/remove old comments and convert them into Doxygen-style.
Some notes:
* Anything labeled 'DOCME' needs to be documented, @param and @return have been left blank as it would be annoying to delete the 'DOCME' from every one of those.
* Some multiline comments may have been munged into single line comments
* Leave the /// comments above global variables with a space, if they're harder to read then we'll be less likey to use them.
* Enum comments can go after the enumeration itself '[value] /// comment'
* include/aegisub/*.h haven't been converted yet, this will be done in a later commit
* Some documentation blocks are in the wrong place, in the .h when it should be in the .cpp, or vice versa.
See http://devel.aegisub.org/wiki/Doxygen for some details on Doxygen and a 'style guide'.
Originally committed to SVN as r3312.
2009-07-30 00:59:22 +02:00