Aegisub/aegisub/spline_curve.cpp
Amar Takhar 0763541848 Change how configuration works.
* move win32/config0.h -> config/config_windows0.h
  * move win32/stdint.h -> msvc/stdint.h
  * move posix/defines.h -> config/config_unix.h
  * add config.h - brings in config_(windows|unix).h as required
  * add config.h to *.cpp
  * Self-contain FFmpegSource2 with required function defines wrapped with
    __UNIX__ instead of the now removed defines.h.
  * Edit aegisub_vs2008.vcproj to remove explicit inclusion of config.h, also
    change VCPreBuildEventTool to create windows_config.h from
    windows_config0.h.  Add msvc to include path.
  * Change configure to create ./acconf.h instead of posix/acconf.h

This will allow us to create a more standard and platform agnostic way of
configuration aegsisub during build time.

Originally committed to SVN as r2621.
2009-01-04 06:31:48 +00:00

228 lines
6 KiB
C++

// Copyright (c) 2007, Rodrigo Braz Monteiro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of the Aegisub Group nor the names of its contributors
// may be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// -----------------------------------------------------------------------------
//
// AEGISUB
//
// Website: http://aegisub.cellosoft.com
// Contact: mailto:zeratul@cellosoft.com
//
///////////
// Headers
#include "config.h"
#include "spline_curve.h"
#include "utils.h"
/////////////////////
// Curve constructor
SplineCurve::SplineCurve() {
type = CURVE_INVALID;
}
/////////////////////////////////////////////////////////
// Split a curve in two using the de Casteljau algorithm
void SplineCurve::Split(SplineCurve &c1,SplineCurve &c2,float t) {
// Split a line
if (type == CURVE_LINE) {
c1.type = CURVE_LINE;
c2.type = CURVE_LINE;
c1.p1 = p1;
c2.p2 = p2;
c1.p2 = p1*(1-t)+p2*t;
c2.p1 = c1.p2;
}
// Split a bicubic
else if (type == CURVE_BICUBIC) {
c1.type = CURVE_BICUBIC;
c2.type = CURVE_BICUBIC;
// Sub-divisions
float u = 1-t;
Vector2D p12 = p1*u+p2*t;
Vector2D p23 = p2*u+p3*t;
Vector2D p34 = p3*u+p4*t;
Vector2D p123 = p12*u+p23*t;
Vector2D p234 = p23*u+p34*t;
Vector2D p1234 = p123*u+p234*t;
// Set points
c1.p1 = p1;
c2.p4 = p4;
c1.p2 = p12;
c1.p3 = p123;
c1.p4 = p1234;
c2.p1 = p1234;
c2.p2 = p234;
c2.p3 = p34;
}
}
//////////////////////
// Smoothes the curve
// Based on http://antigrain.com/research/bezier_interpolation/index.html
void SplineCurve::Smooth(Vector2D P0,Vector2D P3,float smooth) {
// Validate
if (type != CURVE_LINE) return;
if (p1 == p2) return;
smooth = MID(0.0f,smooth,1.0f);
// Get points
Vector2D P1 = p1;
Vector2D P2 = p2;
// Calculate intermediate points
Vector2D c1 = (P0+P1)/2.0f;
Vector2D c2 = (P1+P2)/2.0f;
Vector2D c3 = (P2+P3)/2.0f;
float len1 = (P1-P0).Len();
float len2 = (P2-P1).Len();
float len3 = (P3-P2).Len();
float k1 = len1/(len1+len2);
float k2 = len2/(len2+len3);
Vector2D m1 = c1+(c2-c1)*k1;
Vector2D m2 = c2+(c3-c2)*k2;
// Set curve points
p4 = p2;
p2 = m1+(c2-m1)*smooth + P1 - m1;
p3 = m2+(c2-m2)*smooth + P2 - m2;
type = CURVE_BICUBIC;
}
///////////////
// Get a point
Vector2D SplineCurve::GetPoint(float t) const {
// Point
if (type == CURVE_POINT) return p1;
// Line
else if (type == CURVE_LINE) {
return p1*(1.0f-t) + p2*t;
}
// Bicubic
else if (type == CURVE_BICUBIC) {
float u = 1.0f-t;
return p1*u*u*u + 3*p2*t*u*u + 3*p3*t*t*u + p4*t*t*t;
}
else return Vector2D(0,0);
}
///////////////////////
// Get start/end point
Vector2D SplineCurve::GetStartPoint() const {
return p1;
}
Vector2D SplineCurve::GetEndPoint() const {
switch (type) {
case CURVE_POINT: return p1;
case CURVE_LINE: return p2;
case CURVE_BICUBIC: return p4;
default: return p1;
}
}
//////////////////////////////////
// Get point closest to reference
Vector2D SplineCurve::GetClosestPoint(Vector2D ref) const {
return GetPoint(GetClosestParam(ref));
}
///////////////////////////////////////////
// Get value of parameter closest to point
float SplineCurve::GetClosestParam(Vector2D ref) const {
// Line
if (type == CURVE_LINE) {
return GetClosestSegmentPart(p1,p2,ref);
}
// Bicubic
if (type == CURVE_BICUBIC) {
int steps = 100;
float bestDist = 80000000.0f;
float bestT = 0.0f;
for (int i=0;i<=steps;i++) {
float t = float(i)/float(steps);
float dist = (GetPoint(t)-ref).Len();
if (dist < bestDist) {
bestDist = dist;
bestT = t;
}
}
return bestT;
}
// Something else
return 0.0f;
}
//////////////////
// Quick distance
float SplineCurve::GetQuickDistance(Vector2D ref) const {
// Bicubic
if (type == CURVE_BICUBIC) {
float len1 = GetClosestSegmentDistance(p1,p2,ref);
float len2 = GetClosestSegmentDistance(p2,p3,ref);
float len3 = GetClosestSegmentDistance(p3,p4,ref);
float len4 = GetClosestSegmentDistance(p4,p1,ref);
float len5 = GetClosestSegmentDistance(p1,p3,ref);
float len6 = GetClosestSegmentDistance(p2,p4,ref);
return MIN(MIN(MIN(len1,len2),MIN(len3,len4)),MIN(len5,len6));
}
// Something else
else return (GetClosestPoint(ref)-ref).Len();
}
//////////////////////////////////////////
// Closest t in segment p1-p2 to point p3
float SplineCurve::GetClosestSegmentPart(Vector2D pt1,Vector2D pt2,Vector2D pt3) const {
return MID(0.0f,(pt3-pt1).Dot(pt2-pt1)/(pt2-pt1).SquareLen(),1.0f);
}
/////////////////////////////////////////////////
// Closest distance between p3 and segment p1-p2
float SplineCurve::GetClosestSegmentDistance(Vector2D pt1,Vector2D pt2,Vector2D pt3) const {
float t = GetClosestSegmentPart(pt1,pt2,pt3);
return (pt1*(1.0f-t)+pt2*t-pt3).Len();
}