Aegisub/aegisub/src/visual_tool_drag.cpp
Niels Martin Hansen 70d41d31b2 Remove the SelectionChangeSubscriber mechanism from the grid and implement some basic selection change notification through SelectionController.
Change SelectionListener interface so it receives the set of lines added and removed from selection, instead of just the complete new selection.
Update VisualTool<> to use SelectionListener to receive selection change notifications.

This change (temporarily, I hope) breaks feature selection in visual drag mode, when changing selection via the grid. This is caused by the grid selection change first clearing the entire selection, which sends a separate notification about selection clear. This causes the last visual feature to be deselected, and then the visual tool base reselects the active line, causing a new notification for selection to be sent. The active line happens to be the newly clicked line, and the selection notification enters during the externalChange guard being set, and is then ignored for feature update purposes. When control returns to the original SelectRow call in the grid, the line to be selected has already been selected and then nothing happens.
The best fix is to avoid two notifications being required to deselect all then reselect one line in the first place, so making the grid selection handling saner is the best fix.

Originally committed to SVN as r4602.
2010-06-26 04:38:02 +00:00

361 lines
10 KiB
C++

// Copyright (c) 2007, Rodrigo Braz Monteiro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of the Aegisub Group nor the names of its contributors
// may be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Aegisub Project http://www.aegisub.org/
//
// $Id$
/// @file visual_tool_drag.cpp
/// @brief Position all visible subtitles by dragging visual typesetting tool
/// @ingroup visual_ts
#include "config.h"
#include "ass_dialogue.h"
#include "ass_file.h"
#include "libresrc/libresrc.h"
#include "subs_edit_box.h"
#include "subs_grid.h"
#include "utils.h"
#include "vfr.h"
#include "video_context.h"
#include "video_display.h"
#include "visual_tool_drag.h"
enum {
BUTTON_TOGGLE_MOVE = VISUAL_SUB_TOOL_START
};
static const DraggableFeatureType DRAG_ORIGIN = DRAG_BIG_TRIANGLE;
static const DraggableFeatureType DRAG_START = DRAG_BIG_SQUARE;
static const DraggableFeatureType DRAG_END = DRAG_BIG_CIRCLE;
/// @brief Constructor
/// @param _parent
/// @param toolBar
VisualToolDrag::VisualToolDrag(VideoDisplay *parent, VideoState const& video, wxToolBar * toolBar)
: VisualTool<VisualToolDragDraggableFeature>(parent, video)
, toolBar(toolBar)
, primary(NULL)
, toggleMoveOnMove(true)
{
toolBar->AddTool(BUTTON_TOGGLE_MOVE, _("Toggle between \\move and \\pos"), GETIMAGE(visual_move_conv_move_24));
toolBar->Realize();
toolBar->Show(true);
}
void VisualToolDrag::UpdateToggleButtons() {
// Check which bitmap to use
bool toMove = true;
AssDialogue *line = GetActiveDialogueLine();
if (line) {
int x1,y1,x2,y2,t1,t2;
bool hasMove;
GetLineMove(line,hasMove,x1,y1,x2,y2,t1,t2);
toMove = !hasMove;
}
// No change needed
if (toMove == toggleMoveOnMove) return;
// Change bitmap
if (toMove) {
toolBar->SetToolNormalBitmap(BUTTON_TOGGLE_MOVE, GETIMAGE(visual_move_conv_move_24));
}
else {
toolBar->SetToolNormalBitmap(BUTTON_TOGGLE_MOVE, GETIMAGE(visual_move_conv_pos_24));
}
toggleMoveOnMove = toMove;
}
/// @brief Toggle button pressed
/// @param event
void VisualToolDrag::OnSubTool(wxCommandEvent &) {
BaseGrid* grid = VideoContext::Get()->grid;
wxArrayInt sel = GetSelection();
// Toggle \move <-> \pos
for (wxArrayInt::const_iterator cur = sel.begin(); cur != sel.end(); ++cur) {
int x1,y1,x2,y2,t1,t2;
bool hasMove;
AssDialogue *line = grid->GetDialogue(*cur);
if (!line) continue;
GetLinePosition(line,x1,y1);
GetLineMove(line,hasMove,x1,y1,x2,y2,t1,t2);
parent->ToScriptCoords(&x1, &y1);
parent->ToScriptCoords(&x2, &y2);
if (hasMove) SetOverride(line, L"\\pos",wxString::Format(L"(%i,%i)",x1,y1));
else SetOverride(line, L"\\move",wxString::Format(L"(%i,%i,%i,%i,%i,%i)",x1,y1,x1,y1,0,line->End.GetMS() - line->Start.GetMS()));
}
Commit(true);
Refresh();
}
void VisualToolDrag::DoRefresh() {
UpdateToggleButtons();
}
void VisualToolDrag::OnSelectedSetChanged(const Selection &added, const Selection &removed) {
if (!externalChange) return;
externalChange = false;
// Remove all deselected lines
for (size_t i = 0; i < features.size(); i++) {
if (removed.find(features[i].line) != removed.end()) {
RemoveSelection(i);
}
}
// And add all newly selected lines
for (size_t i = 0; i < features.size(); i++) {
if (added.find(features[i].line) != added.end() && features[i].type == DRAG_START) {
AddSelection(i);
}
}
externalChange = true;
}
void VisualToolDrag::Draw() {
DrawAllFeatures();
// Draw arrows
for (feature_iterator cur = features.begin(); cur != features.end(); ++cur) {
if (cur->type == DRAG_START) continue;
VisualDraggableFeature *p2 = &*cur;
VisualDraggableFeature *p1 = &features[cur->parent];
// Has arrow?
bool hasArrow = p2->type == DRAG_END;
int arrowLen = hasArrow ? 10 : 0;
// See if the distance between them is enough
int dx = p2->x - p1->x;
int dy = p2->y - p1->y;
int dist = (int)sqrt(double(dx*dx + dy*dy));
if (dist < 20+arrowLen) continue;
// Get end points
int x1 = p1->x + dx*10/dist;
int x2 = p2->x - dx*(10+arrowLen)/dist;
int y1 = p1->y + dy*10/dist;
int y2 = p2->y - dy*(10+arrowLen)/dist;
// Draw arrow
if (hasArrow) {
// Calculate angle
double angle = atan2(double(y2-y1),double(x2-x1))+1.570796;
int sx = int(cos(angle)*4);
int sy = int(-sin(angle)*4);
// Arrow line
SetLineColour(colour[3],0.8f,2);
DrawLine(x1,y1,x2,y2);
// Arrow head
DrawLine(x2+sx,y2-sy,x2-sx,y2+sy);
DrawLine(x2+sx,y2-sy,x2+dx*10/dist,y2+dy*10/dist);
DrawLine(x2-sx,y2+sy,x2+dx*10/dist,y2+dy*10/dist);
}
// Draw dashed line
else {
SetLineColour(colour[3],0.5f,2);
DrawDashedLine(x1,y1,x2,y2,6);
}
}
}
void VisualToolDrag::PopulateFeatureList() {
ClearSelection(false);
primary = -1;
GenerateFeatures();
}
void VisualToolDrag::GenerateFeatures() {
features.clear();
// Get video data
BaseGrid* grid = VideoContext::Get()->grid;
int numRows = grid->GetRows();
for (int i=numRows;--i>=0;) {
AssDialogue *diag = grid->GetDialogue(i);
if (!diag || !BaseGrid::IsDisplayed(diag)) continue;
// Get position
int x1,x2,y1,y2;
int t1=0;
int t2=diag->End.GetMS()-diag->Start.GetMS();
int torgx,torgy;
bool hasMove;
GetLinePosition(diag,x1,y1,torgx,torgy);
GetLineMove(diag,hasMove,x1,y1,x2,y2,t1,t2);
// Create \pos feature
VisualToolDragDraggableFeature feat;
feat.x = x1;
feat.y = y1;
feat.layer = 0;
feat.type = DRAG_START;
feat.time = t1;
feat.line = diag;
feat.lineN = i;
features.push_back(feat);
feat.parent = features.size() - 1;
if (grid->IsInSelection(i)) {
AddSelection(features.size() - 1);
}
// Create move destination feature
if (hasMove) {
feat.x = x2;
feat.y = y2;
feat.layer = 1;
feat.type = DRAG_END;
feat.time = t2;
feat.line = diag;
feat.lineN = i;
features.push_back(feat);
features[feat.parent].parent = features.size() - 1;
}
// Create org feature
if (torgx != x1 || torgy != y1) {
feat.x = torgx;
feat.y = torgy;
feat.layer = -1;
feat.type = DRAG_ORIGIN;
feat.time = 0;
feat.line = diag;
feat.lineN = i;
features.push_back(feat);
}
}
}
bool VisualToolDrag::InitializeDrag(VisualToolDragDraggableFeature *feature) {
primary = feature - &features[0];
return true;
}
/// @brief Update drag
/// @param feature
void VisualToolDrag::UpdateDrag(VisualToolDragDraggableFeature* feature) {
// Update "time" to reflect the time of the frame in which the feature is being dragged
int time = VFR_Output.GetTimeAtFrame(frame_n,true,true);
feature->time = MID(0,time - feature->line->Start.GetMS(),feature->line->End.GetMS()-feature->line->Start.GetMS());
}
/// @brief Commit drag
/// @param feature
void VisualToolDrag::CommitDrag(VisualToolDragDraggableFeature* feature) {
if (feature->type == DRAG_ORIGIN) {
int x = feature->x;
int y = feature->y;
parent->ToScriptCoords(&x, &y);
SetOverride(feature->line, L"\\org",wxString::Format(L"(%i,%i)",x,y));
return;
}
VisualToolDragDraggableFeature *p = feature->parent > -1 ? &features[feature->parent] : NULL;
if (feature->type == DRAG_END) {
std::swap(feature, p);
}
int x1 = feature->x;
int y1 = feature->y;
parent->ToScriptCoords(&x1, &y1);
// Position
if (!p) {
SetOverride(feature->line, L"\\pos", wxString::Format(L"(%i,%i)", x1, y1));
}
// Move
else {
int x2 = p->x;
int y2 = p->y;
parent->ToScriptCoords(&x2, &y2);
// Set override
SetOverride(feature->line, L"\\move", wxString::Format(L"(%i,%i,%i,%i,%i,%i)", x1, y1, x2, y2, feature->time, p->time));
}
}
bool VisualToolDrag::Update() {
if (!leftDClick) return false;
int dx, dy;
int vx = video.x;
int vy = video.y;
parent->ToScriptCoords(&vx, &vy);
if (primary > -1) {
dx = features[primary].x;
dy = features[primary].y;
}
else {
AssDialogue* line = GetActiveDialogueLine();
if (!line) return false;
GetLinePosition(line, dx, dy);
}
parent->ToScriptCoords(&dx, &dy);
dx -= vx;
dy -= vy;
SubtitlesGrid *grid = VideoContext::Get()->grid;
wxArrayInt sel = grid->GetSelection();
for (wxArrayInt::const_iterator cur = sel.begin(); cur != sel.end(); ++cur) {
AssDialogue* line = grid->GetDialogue(*cur);
if (!line) continue;
int x1 = 0, y1 = 0, x2 = 0, y2 = 0, t1 = INT_MIN, t2 = INT_MIN, orgx, orgy;
bool isMove;
GetLinePosition(line, x1, y1, orgx, orgy);
GetLineMove(line, isMove, x1, y1, x2, y2, t1, t2);
parent->ToScriptCoords(&x1, &y1);
parent->ToScriptCoords(&x2, &y2);
parent->ToScriptCoords(&orgx, &orgy);
if (isMove) {
if (t1 > INT_MIN && t2 > INT_MIN)
SetOverride(line, L"\\move", wxString::Format(L"(%i,%i,%i,%i,%i,%i)", x1 - dx, y1 - dy, x2 - dx, y2 - dy, t1, t2));
else
SetOverride(line, L"\\move", wxString::Format(L"(%i,%i,%i,%i)", x1, y1, x2, y2));
}
else {
SetOverride(line, L"\\pos", wxString::Format(L"(%i,%i)", x1 - dx, y1 - dy));
}
if (orgx != x1 || orgy != y1) {
SetOverride(line, L"\\org", wxString::Format(L"(%i,%i)", orgx - dx, orgy - dy));
}
}
Commit(true, _("positioning"));
GenerateFeatures();
return false;
}